Water Quality
Diversion Object Water Quality
The Diversion Object has water quality methods simply to pass values from the source to the destination. There are no dispatch methods; water quality constituent values are transferred via links. You should link the constituent slot to slots on both the source and destination objects.
Slots
Salt Slots
Salt Concentration
Type: Series Slot
Units: Concentration
Description: Salt concentration associated with the flow diverted.
I/O: Input, set by a rule, or propagated via a link
Links: Linkable, typically to Diversion Salt Concentration on a reach or reservoir.
Temperature Slots
Heat
Type: Series Slot
Units: Heat
Description: Heat associated with the flow diverted.
I/O: Input, set by a rule, or propagated via a link
Links: Linkable
Dissolved Oxygen Slots
Ammonia Mass
Type: Series Slot
Units: Mass
Description: Ammonia mass associated with the flow diverted.
I/O: Input, set by a rule, or propagated via a link
Links: Linkable
Detritus Mass
Type: Series Slot
Units: Mass
Description: Detritus mass associated with the flow diverted.
I/O: Input, set by a rule, or propagated via a link
Links: Linkable
Dissolved Organics Mass
Type: Series Slot
Units: Mass
Description: Dissolved organics mass associated with the flow diverted.
I/O: Input, set by a rule, or propagated via a link
Links: Linkable
Dissolved Oxygen Mass
Type: Series Slot
Units: Mass
Description: Dissolved oxygen mass associated with the flow diverted.
I/O: Input, set by a rule, or propagated via a link
Links: Linkable
User Methods
The following section describes the user-selectable methods for water quality modeling on the Bifurcation.
Revised: 11/11/2019