skip to main content
Previous Elevation
Three user methods are available for this method category: None, Input Elevation, and Storage Elevation Interpolation. These methods are dependent upon the selection of the Single Computed Outflow in the Solution Type category.
* None
This is the default method. It performs no calculations.
There are no slots specific to this method.
* Input Elevation
This method instantiates the Previous Groundwater Elevation slot for user input.
Slots Specific to This Method
 Previous Groundwater Elevation
Type: SeriesSlot
Units: length
Description: user input previous groundwater elevation
Information:  
I/O: Required input
* Storage Elevation Interpolation
This method instantiates the Previous Groundwater Elevation and Storage Elevation Table slots. User input is required in the Storage Elevation Table relating storage volume to groundwater elevation. The Previous Groundwater Elevation slot is set based on table interpolation of storage values at the previous timestep. The Previous Groundwater Elevation slot is linkable to Agg Diversion Site and Water User objects.
Slots Specific to This Method
 Storage Elevation Table
Type: TableSlot
Units: volume vs. length
Description: user input relating storage volume and groundwater elevation
Information:  
I/O: Required input
 Previous Groundwater Elevation
Type: SeriesSlot
Units: Length
Description: previous groundwater elevation based upon the Storage Elevation Table
I/O: Output only
Revised: 01/05/2024