skip to main content
Rulebased Simulation
Due to many changes in the Rulebased Simulation Controller and Rule Processor over the past several releases, an overview is included at the end of these release notes. See the overview for a complete picture of the current Rulesbased Simulation logic.
Maximum Rule Execution Iterations
The Rulebased Simulation controller now keeps track of Rule execution iterations. The iteration count is used to interrupt a run if a Rule executes more than 50 times in a single timestep. Previously, there was no way to interrupt infinite loops in the iteration between Rules and Simulation.
Group Set of Slot Assignments
Checking of dispatch conditions is now delayed until all of a Rule’s slot assignments have been made. Previously, objects checked their dispatch conditions whenever a dispatching slot value was set. For Rules which only set a single slot, this created no ambiguity. For Rules which set multiple slots, however, this allowed objects to be placed on the dispatch queue even if the Rule had other slots yet to be set on this object. In some cases, the slots remaining to be set would have forced a different dispatch method to be selected. To alleviate any ambiguity, dispatch conditions are no longer checked until all of a Rule’s slot assignments have been made.
Simulation Errors During Rule Execution
Errors generated during Rule execution calls to Simulation functions no longer abort the run. Errors are now returned to the Rule Processor for interpretation. Previously, any error generated in a Simulation engineering function which was called during the execution of a Rule automatically posted a message and aborted the run (the Simulation Controller still behaves this way). The Rule Processor, however, now catches simulation errors and terminates the executing rule instead. The rule does not continue, and no slot assignments are made. The rule may re-fire at a later time.
RiverWare Tcl procedures which invoke methods on the Engineering Objects are prevented from aborting the run. Since these functions solve hypothetical problems for the rules only and do not set slots, their failure should only impact the currently executing rule. All Tcl procedures, however, will continue to abort the run if fundamental errors are detected (incomplete arguments, invalid dates/times, etc.). The effects of errors in each of the currently defined Tcl procedures included in RiverWare are as follows:
 
RiverWare Tcl Procedure
Effect of Error
RiverWare Tcl Procedure
Effect of Error
C_SolveInflow
Terminate Rule
all C_<Get/Set><Value/List>
Abort Run
C_SolveOutflow
Terminate Rule
C_IsNaN
Abort Run
C_SolveStorage
Terminate Rule
all C_Sum<Table/Object>List
Abort Run
C_TableInterpolate
Terminate Rule
C_Exit
Abort Run
C_StorageToArea
Terminate Rule
C_GetAllNamedBasins
Abort Run
C_ElevationToArea
Terminate Rule
C_GetObjectsInBasin
Abort Run
C_ElevationToStorage
Terminate Rule
all C_AggOver<Obj/Time>
Abort Run
C_ElevationToMaxRegulatedSpill
Terminate Rule
C_ConvertValue
Abort Run
C_ElevationToUnregulatedSpill
Terminate Rule
C_FlowToVolume
Abort Run
C_OperatingHeadToMaxRelease
Terminate Rule
C_VolumeToFlow
Abort Run
C_GetMaxOutflowGivenInflow
Terminate Rule
all C_CopySlot<s>
Abort Run
C_GetMaxOutflowGivenStorage
Terminate Rule
all C_ConstrainSlot
Abort Run
C_GetMaxOutflowGivenHW
Terminate Rule
all C_Get<Date/Time>
Abort Run
C_NetNonShortDiversionRequirement
Terminate Rule
all C_Incr<Date/Time>
Abort Run
C_Six02a
Terminate Rule
all C_Decr<Date/Time>
Abort Run
C_CriticalPeriodUBDepletions
Terminate Rule
all C_<reset>RandDev
Abort Run
C_TargetSpace
Terminate Rule
C_GetStepSeconds
Abort Run
C_MaxAllowableStorage
Terminate Rule
C_Min
Abort Run
C_ReleaseNeeded
Terminate Rule
C_Max
Abort Run
C_InflowAbove
Terminate Rule
C_Print
Abort Run
C_ConsumptionAbove
Terminate Rule
C_Trace
Abort Run
C_PredictedInflow
Terminate Rule
 
 
Average Pool Elevation for Max Outflow Tcl Routines
The average Pool Elevation over the current timestep is now used to determine the maximum Release and Spill for C_getMaxOutflowGiven<Inflow/Storage/HW> Custom Tcl Routines. Previously, the Pool Elevation at the end of the current timestep (current Pool Elevation) was used. Now, the Pool Elevation at the beginning of the current timestep (previous Pool Elevation) is averaged with the most recent estimate of the Pool Elevation at the end of the current timestep. This average elevation is used in the Max Release/Max Turbine Q, Unregulated Spill Table, and Regulated Spill Table (if applicable) to determine the maximum Outflow.
getMaxOutflowGivenInflow Tcl Routine
The getMaxOutflowGivenInflow Custom Tcl Routine has been modified to not require a Pool Elevation value as a seed to the iterative solution. The new arguments for this function are as follows:
• C_getMaxOutflowGivenInflow reservoir inflow inflowScale inflowUnits
• outflowReturnScale
• outflowReturnUnits
Revised: 07/05/2022